类型: IC
作者: yuutsu
发布时间: 2021-09-28
07:25:41
更新时间: 2021-12-13 07:37:09
原链接:
https://geekhack.org/index.php?topic=114769.0
Hello, yuutsu from Desktop Designs here.
In
the shortest words I can, 100% Transparency, entirely
upfront and honest about the process with weekly updates,
and
most importantly: a lot less marketing than what we are
currently seeing.
So, with that out of the way, let’s
begin the no bullsh/*t IC:
Discord Server for updates and future releases
|
IC Form
Name: Symmetry 70
Goal: To bring out the most
symmetrical design possible while using simple layouts
Layout:
Fixed Tsangan 70% (60% + Esc-F13)
Mount: Modified
GEON F1-8x O-ring cord.
Typing Angle: 7 Degrees
Pricing:
~$480, see change log below for why this increased. (still
looking into it for exact numbers)
Units: 300 + 60
extras (60 of each color total, this may increase at a
later date depending on demand)
GB Date: Early
2022
Lead Time: TBD
Front Height: 20mm from
bottom to front edge, 24.3mm for effective front height
(to
switch stem for the people who don’t know about the better
system)
Foam: None, and no optional either, this was not made
with foam in mind.
Differences from Geon’s mount:
bigger width cord, softer cord…. that’s it.
PCB Specs:
- Made by Sakura Phoenix
- Yellow (prototypes are purple)
- 1.6mm thickness
-
VIA and QMK Compatible
Color Options, Sandblast: 150 (Pictured Below and in discord server):
NOTE: ALL VERSIONS OF THE BOARD EXCEPT SILVER WILL BE 2 TONE (see prototype pictures)
Pink (Pantone 2037c)
Red (Pantone 1797c)
Navy (Pantone 2955c)
Silver
-
E-white or Grey (depending on the manufacturer I choose)
-
Black
Vendors NA: Desktop Designs (My own storefront)
Asia: TBD
-
Europe: TBD
Like I said above, I am currently looking into multiple manufacturers at the moment, one of which is in the color matching phase right now. As for the prototype we made one final change to make the 4head and chin smaller because it looked better imo so anyone who thinks otherwise can click off now.
Anyways, we also made a change to the feet for custom molded ones based off of the SCUF design by Zambumon, but those were too tall and would probably change the front height a lot for non-deskmat users, so we made it much smaller (see below)
Here are some pictures of the keboard if you would like to see them for yourself:
(please note that this is not the final design and there is a redesign as stated above, prototypes for that soontm)
Here is a sound test if you feel like watching it:
(alpacas on alu)