类型: IC
作者: windlabs
发布时间: 2021-09-28 01:21:08
更新时间:
2021-10-21 01:09:06
原链接:
https://geekhack.org/index.php?topic=114767.0
Wind.X
Hello Geekhack,
We are Wind Studio from China
Wind series:
The major difference is it allows for a 2U 0 key,
which is very important to dozens of people, especially if
you’re used to typing 0 with your thumb. And then there are
those that meet the requirements like Austin.
First of all, let’s talk about the theme, simple
appearance and enough sincerity of the internal structure
optimization, I believe that is “interesting soul pick one
in ten thousand, nice-looking is the same”.
The
appearance is very simple, and very durable. The front arrow
keys on the top and back of the strip out of the strip are
brass weight
So the looks very simple, but what is the feature of
this kit?
First of all, the kit is a three layer
structure.
To allow for a sleeker look than the conventional
three-layer structure, we adopted the design of the bottom
case and the middle has a gap in between top and bottom. The
silver waist line in the picture is part of the bottom case
.
The plate is sandwhiched bottom case and the top
case, and then the middle frame is fixed to the top frame to
achieve this effect.
note：The plate has cut outs that
supports the ability to remove stabs without complete
disassembly，it is friendly to somebody new to this
hobby.
Because it is a big layout, so we use the split plate
and PCB.
This is done to maximize the Gasket
experience. Originally, we planned to learn the popular
large flex cut plate and PCB, after proofing, we found that
such a long cut PCB would lead to the consistency of typing
is poor, the middle will be very soft, and the harder it
will be towards both sides. It was soft but it sacrificed
too much consistency. So we changed the design.
The newly designed slotting method can achieve a
relatively balanced state in soft projectile and feel
consistency. It’s a way that works for most people.
we
also changed the original plate thickness from 1.6mm into
1+0.5mm, that is, 1mm plate (PC, POM, FR4) and 0.5mm
silicone pad (shaw 40). The advantage of this is that when
the switch is pressed, the switch will put pressure on the
silcone pad in the first time. The reason why we adopted the
hardness of 40 is that the hardness of 40 is relatively
neutral, which can be of great help in the consistency of
resilience.
we have one more layout question to
address:
we will use two kinds of PCB (soldered and hot
swap) (there will also be two kinds of plates). The soldered
version can be compatible with large layout (recommended),
but the hot swap version cannot be compatible with large
layout, because the fixation of large keys and the easy
disassembly of stablizer axis need to be considered, so hot
swap can only be compatible with one kind of layout.
(QMK&VIA)
All that’s left is some basic
information.
Material: 6063
Weight: brass
(transparent electrophoresis)
Angle: 7 °
Fixed
mode: Gasket
color :
Anode: ano black , ano
silver, ano gray, ano orange (1655C),ano red (186C)
Electrophoresis:
e white, e yellow, e pink, e green (grass green)
Please fill out the
IC Form
How:
Instock：200sets（e-white+e-yellow 80 sets，ano
black+ano orange 60 sets，ano black+ano silver 60 sets）
GB:
300 units（ no color limit, but only fixed combinations can
be selected）
Price: standard:298 usd
When: November 10th 8：00(Beijing time)
more pics：
discord
update history：2021.09,28 IC
2021.10.01 update
more pics
2021.10.21 update more GB color details