类型: IC
作者:
westfoxtrot
发布时间:
2018-10-24 15:28:52
更新时间: 2018-10-24 15:50:07
原链接:
https://geekhack.org/index.php?topic=97882.0
Hello folks. First off, thanks for checking out my
keyboard! Heres some beautiful renders produced by
Egla from the International Kit:
Click here for more
With this board I aimed to create a board with a
subtle signature that was easily recognisable. To this aim
Ive got a few unique features. First off I have a straight
line at the front and back of the board accented by the
plate itself stepping through the sides of the case
In the original design this was designed to be Blue
with a brass plate to accent, hence the name which is Dutch
for on sea
Ive also included a slight slope raise of
height between the front and the back of the board to
surround the caps a little more, higher at the back than at
the front. Its 7mm at the front and 9mm at the back. Its a
small difference but, for me, it creates a unique structure
to the board.
It has compatibility with a tada68 pcb
and I intend to share the plate files so you can always
custom cut additional plates if you need. So far I have my
vision of the buy structured like so:
25 units in
aluminium, all numbered 1-25. Choice of 6 colours for all
aluminium parts.
10 units in polycarbonate, separately
numbered 1-10.
Features:
7-9mm High Profile
Sandwich
Mount
5° typing angle
Separate ISO & ANSI
plate
.5u blocker for arrows
Polycarbonate or
Aluminium body
Polycarbonate, Aluminium or Brass
plate
Sandblasted Brass weight
Sandblasted Brass
or aluminium name plate with custom lettering
Custom
PCB (South facing LEDs)
Custom colours have been
selected by me following some samples from my factory. I
have chosen 6 colours in total:
Charcoal
Aubergine
Olivia
Ocean
Royal
Green
Anthracite
Click here to see an album of the colour samples.
I have produced a prototype of the board in
polycarbonate which helped me to learn a lot about the
positives and negatives of the original design and tweak
based on this. Changes include: raising the top piece 1mm
overall. Dropping the overall height of the board 6mm.
Adjusting the nameplate and weight mounting. Changing brass
from polished to sandblasted.
Here you can see an album of the prototype
Ive also worked closely with a designer to come up
with a slightly fresher feel for the board, changing the
font used from the prototype and changing the logo to a
completely new design, Im really happy with the work she did
and have to give her a huge shout out here:
Morgana on Twitter
I have implemented the changes in the working design
and they will be in the final parts
You can see the
proposed redesign here:
Due to the limited run of this board we are looking
at a price of around $425-50 US per board (not including
shipping)
Additional parts prices would be structured
like so:
Plate $80
Nameplate $25
PCB $50
I
plan to run this buy in november assuming this IC is
well-received
Sig edit: fixed some stuff [: