类型: IC
作者: kristmascane
发布时间: 2018-09-30
15:22:05
更新时间: 2019-02-20 21:31:13
原链接:
https://geekhack.org/index.php?topic=97543.0
UPDATE
Hey guys, I know it’s been a while. I’d like to
update this thread by letting you all know that for the
forseeable future, this project is on hold/canceled. I’m at
a point in my life where I just don’t have time to be held
accountable for a group buy and would rather not let a buy
happen that I wouldn’t be able to dedicate more of my time
to.
I’m very sorry if you were looking forward to this
and saving up for it. Hopefully in the future I will be able
to come back to this or a new design. If you were saving
money for me, i’m flattered, but go spend it on Yuktsi or
someone
Staccato: (adverb&adjective)
with each sound or
note sharply detached or separated from the
others.
Renders:
You can see the gaskets here^ (mirrored on the top of
the case as well)
and the channels for the gaskets here ^ (mirrored on
the top of the case as well)
Wkl version ^
(shoutout to hiney for those keycaps btw)
https://media.giphy.com/media/3FbDBpOI4S66IOHGAS/giphy.gif
Detailed view of assembly ^
Hello All,
Staccato
is a 60% hhkb/wkl layout board i’ve been designing for the
better part of this year. The name “Staccato” refers to
extremely short and isolated notes in the music world and
the goal of these gaskets is to isolate the plate from the
other parts of the case. Increasing the torque on the screws
will increase the amount of sound transferred through the
gaskets to the plate and will inherently change the sound. I
will provide a video in the future to illustrate this a bit
better. Currently I have nitrile gaskets (the same material
as o-rings) but I have ordered a few different materials
including foam to test. Upon reception of the initial
prototype, I discovered a few errors in my design that have
since been fixed. The blockers on the hhkb version were .5mm
to big, the usb port was too small to support all cable
types. The 2nd prototype has been ordered and I will report
back with more photos once I have that in my hands.
Pricing
- TBD depending on units sold (most likely below 300 usd
excluding shipping)
Angle - The case is at a 6.66
degree angle
NE ISO AVAIL? - No I will not support ISO
or any other layouts than what the plate shows (7u hhkb/wkl
with split backspace, stepped caps, and split r shift
support. If you MUST have an ISO plate, I will post a plate
file here and you can get it cut with laserboost or
lasergist
What colors will be available - None have been
selected yet, but i will ask the factory for a list of all
they offer (i just submitted a pantone to get my
prototype)
What materials will you offer? - aluminum
only for the case, brass only for the weight, and aluminum
or brass for the plate. Possibly a copper plate at a higher
cost
What pcb works with this? - any universal poker
style pcb (gh60,dz60,panc60,b.face,etc)
I will update
this with a google form to formally record questions and
answers, but in the meantime please leave your comments and
concerns below.
Thank you
https://docs.google.com/forms/d/e/1FAIpQLSfHtQwUVkDuscssFfY1hpE3GeVi24JFL_2d83pNs9bjS9IfYA/viewform?usp=sf_link
Form added ^