类型: IC
作者: Friendship
发布时间: 2022-06-27
21:42:09
更新时间: 2022-11-14 10:14:56
原链接:
https://geekhack.org/index.php?topic=117636.0
[ The NUM1 ]
A gummy o-ring mounted number pad with a
Daughterboard, Bluetooth, alternative top mount, and Alps
compatibility.
GB THREAD HERE:
https://geekhack.org/index.php?topic=118848.0
—————————————————–
V2 and V2.5 prototype
photos:
—————————————————-
[ The Group Buy information
]
Vendor: The fantastic
https://thockeys.com
!!!
Price: $250 for the kit (batteries
not included)
Sale format: Raffle
Unit count: 21
units
Timeline: GROUPBUY RAFFLE OPEN NOVEMBER 19-22
Extras:
$12 - MX PP Plate - Cut by the
wonderful Jake at the
https://p3dstore.com
$18 - MX Alu plate - “jack”
anodization color
$18 - Alps Alu Plate
- “jack” anodization color
$30 -
PCB
$6 - O-ring 50A
$55
- Case top (one of the 3 colors to choose from)
—————————————————–
[
The Kit ]
- NUM1 case top (color info below)
- NUM1 case bottom Silver Anodization
- Sandblasted brass weight
- Mx 5052 Aluminum Plate (“Jack” anodization color)
- 1.6mm PCB (designed by TrifeLife)
- Daughter board (Unified C3 design)
- 1x JST cable
- 1x 50a O-ring
- Hardware
-
3M bumpons
—————————————————–
[ The Colors ]
“Ron”
more views and Manu color chip:
More
“Gump”
more views and Manu color chip:
More
“Jack”
more views and Manu color chip:
More
—————————————————–
[ The Specs ]
Angle: 6.5
degrees
MX plate material: semi-transparent
polypropylene OR anodized almost black 5052 aluminum
Alps
Plate material: Anodized almost black 5052 aluminum
Firmware:
ZMK
Battery life: ZMK estimates 2-4 weeks
Built
weight: ~1.3 Lbs
—————————————————–
[ The Sound tests ]
Proto
2 sound tests:
Cherry on Alu
https://clips.twitch.tv/AffluentSaltyKangarooPRChase-hpdV_1uDCvYN2_Fa
Cherry on PP
https://clips.twitch.tv/HilariousAbnegateWerewolfDxAbomb-Rr_5XkRev7v9-Uz-
Old sound tests:
More
MX Cherry
https://i.imgur.com/rSbyQQS.mp4
ALPS Blue
https://i.imgur.com/ZI295Rx.mp4
—————————————————–
[ The Layout ]
Applicable for both MX and Alps switches. Sorry no
southpaw. Blue highlighted inner zones are the O-ring
pedestals, outer zones are the top mount points
—————————————————–
[
The Updates ]
7/24/22
More
- Prototype V2 and PCB V2 set to ship Monday 7/25
- V2.5 prototype ordered from another Manu to test their capabilities as a potential production runner (eta 1 month for that). The V2.5 has a larger battery bay, up to 150mAh from 70mAh (battery life pending testing)
- Sale set to a Raffle format
-
$275 price has been removed, current target is $225 but is
not final.
11/4/22 - We have a Vendor!!! huge shoutout to Aiwanei at Thockeys for taking this little passion project on and making it a reality!
- Updated kit (removed battery, removed black hardware torx variant (silver still available)
- Finalized color options (see above)
- Finalized weight material and finish (sandblasted brass)
-
250$ finalized kit price (why the increase? long story
short, the V1 and V2 proto manu become untrustworthy, the
V2.5 proto manu had more errors than i could count, so i
had to choose a Manu that was experienced/well
recommended and sadly a little pricier)
—————————————————–
[ The Discord ]
https://discord.gg/NW8txQcnA8
—————————————————–
[ The Special thanks ]
TrifeLife
Maly
Yataomi
Choobies
The MLI homies
This lil guy: https://i.imgur.com/5znfuGO.jpg
Thank you all for being my friends
Sincerely yours, your friend, -
Friendship
Old IC stuff:
More
[ The Inspiration ]
This was born from being
disappointed in the lack of premium numpad options available
at the time of initial design as well as age old instigating
questions like “what if we slapped an o-ring into it?” and
“what if we slapped bluetooth into it”.
More ramblings
of context:
I was also influenced by one of my favorite
kustoms the GHv2 by LZ.
The engraving and name was born
from some cheeky wordplay of songs by one of my favorite
artists Machinedrum. I binged his music throughout this
design process and felt inclined to immortalize it within
the design. His use of numbers in his song names also
integrated well into the theme of the numpad.
NUM1: a
play on ‘Come1’ off the album Room(s)
Only 1 Way 2
Numpad: a play on ‘Only 1 Way 2 Know’ off the album Vapor
City Archives
I was made aware only somewhat recently
that a fellow member of this community HineyBush designed
the TKL ONE and the NUM ONE (I knew the TKL ONE but didnt
know it had a numpad!). Given the name is nearly identical,
I reached out to Hiney for permission to continue use of the
NUM1 name for this project, He approved!
Thanks Mr. Hiney!
[ The V1 to V2.5 Changes ]
A
more comprehensive history of the design and changes can be
found in my discord below but here are the main points
- Increased total height of the pad 1.4mm to increase case bottom thickness for acoustic improvements to front row switches
- Xonledge added for same reason as above
- USB C cutout squared to accept lindy connectors
- Oring sidewall relief cut depth increased to isolate impact force to just the oring pedistals
- Removed long bumpons in favor of 3m dome bumpons for better acoustic isolation
- Added battery bay and Bluetooth functionality supporting 150Mah LiPo batteries
-
Increased the fillet from 1.25 to 1.5 on edges for softer
feel when moving around your desk
Full album Link: https://imgur.com/a/MFKxSja
V1 prototype photos:
[ The Packaging ]
not enough interest for bionicle tube
