类型: IC
作者:
Old_Gold_Hand
发布时间: 2022-05-21 12:40:48
更新时间:
2022-07-14 19:50:24
原链接:
https://geekhack.org/index.php?topic=117275.0
Pallas
Corian Topped Stacked Acrylic Alice-Style
IC FORM
https://forms.gle/yH3PTSt54EcqegWK8
Website
https://american-haptics.com/
Discord
https://discord.gg/AXDM3sW7qv
Corian, or solid surface countertop, is an engineered
stone product made by Dupont. It’s basically alumina powder,
stone pebbles or gravel, suspended in acrylic. It is heavy
and polishable like stone and comes in all sorts of colors,
patterns, and combinations of materials. It lasers and
polishes beautifully. Previously, we toyed with the idea to
make a lube station from it, but it never really took off.
However, we learned about how to work with it and how to
laser it very accurately. This experience informed us about
the material and led to the development of it’s use in a
stacked acrylic style case.
Pallas is a large asteroid, actually planetoid, in
the asteroid belt.
The Pallas keyboard uses the TGR Alice PCB. It
features a copper plate and phosphor bronze screws. The
Corian color is called Deep Anthracite, and is mostly black
with flecks of gray granite, meant to conjure asteroids in
the void of space. One benefit of Corian and copper is the
increased weight despite being a somewhat low cost
manufacturing method and material.
eclipse_5.webp
(19.05 kB - downloaded 24 times.)
We plan to
manufacture the Pallas in our facility, and run the
GB/Presale from our website.
Price point could be in
the $200-$275 range. There are a lot of factors in this
price, but we aim to keep it on the lower end of the
spectrum to get a premium weight and feel case in your hands
at a reasonable pice. MOQ could be as low as 100
The
best way to connect with us about the Pallas is on our
Discord. We are very available and communicative! Also be
sure to fill out the IC form, which guides us on how to set
the MOQ. Thank you all and look forward to talking to
everyone about it.
UPDATE !
We have had a bit of feedback and some time to tinker around. Quite a few requests for the angled/pointy kind of front that is so iconic on Alice boards. We’re doing some CAD magic to try and get that to work, but in the meantime enjoy some photos of our alpha-stage prototype. Weight is decent!
- This Corian is not really the final Corian, but its a sample piece we could get in the interim to dial in the laser a bit
- The copper plate has not yet arrived, and neither have the bronze screws.
-
More adjustments need to be made for the USB port etc, and
it shows a foot to give a 6.5ish degree typing angle
