类型: IC
作者: wt1155
发布时间: 2022-01-31 03:49:23
更新时间:
2022-07-29 08:47:15
原链接:
https://geekhack.org/index.php?topic=116135.0
Typ 60 by axiöm studios
Links:-
Official website
Join our discord group
Follow us on Instagram
- Typ 60 IC Check Form -
Typ 60 Development Roadmap
Prototyp V1 Concept draft to incorporate multiple
blocker setup on a 60% board. / Completed Proven of
concept and lacking of internal weight to create a balance
acoustic. Prototyp V2 Revise color to Angelite Blue.
Blockers added alignment pins to cop with it sitting flush
against the case. Added weight on the back to create more
balance typing experience. Added Geon 60% feet Tested 1.2mm
pcb with full slit cut plate Prototyp V3 Added color
Titanium SIlver Prototyp for GMK Mictlan Collab, Kneedeep
patina weight completed Rework on Geon 60% feet’s alignment
Tested 1.6mm pcb with full slit cut plate Test CF plate with
rib support to coop with bounciness on “B” key. Prototyp V4
Rework on internal machining tolerance.
Synopsis
A 60% keyboard featuring
interchangeable stainless steel blockers for different
layout configuration (WK, WKL, HHKB). The board uses O-ring
gasket mount design similar to the OTD 356 mini with minimal
compression, a stainless steel weight and blockers all round
and rubber strip feet from Geonworks.
The design was
previously archived back in July 2021 as we chose to run the
Typ 65+ groupbuy first. It had went thru multiple revision
and prototype in course of 6 months and finally ready for an
interest check before going for in-stock sale after Typ 65+
is fulfilled.
Actual pictures of Protoyp V3 for
titanium silver and angelite blue
More
More
More
Typ 60 x GMK Mictlán details
As
part of collaboration with GMK Mictlán and Kneedeep Patina,
we are ready to announce that total of 10 units will be made
available as ready stock raffle later this year exclusively
for supporters who joined GMK Mictlán groupbuy which is
still currently running from 3rd June 2022 to 1st July
2022.
For more information you may refer to GMK Mictlán
keycap set designed by our good friend Vheissu :-
https://geekhack.org/index.php?topic=115163.0
Renders
More
Actual Prototype with IRL Flame Copper Patina by
Kneedeep
Follow Kneedeep Instagram
More
Actual pictures of Protoyp V2 (Angelite Blue) with
GMK Taro (light mods kit)
More
WK layout
WKL layout
HHKB layout
WKL layout in Lapis Blue
Side profile V1 vs V2
Bottom view V1 vs V2
Back and bottom view
New blocker design - Potential V3 prototype pending
(Prototype completed)
More
As we had good suggestion to go with non two step design for
our blocker, we had made some changes on this and here are
the renders.
WK - Not changed from previous design
WKL
HHKB
Case specification
Designed by 14x71
6063 aluminium
7 degree angle
O-ring gasket mount
16.60 front height
-
Sandblasted and coated stainless steel weight and blockers (top, WK, WKL, HHKB)
-
Recessed screw and cutout for custom bumpon provided by Geonworks
Twill carbon fiber plate (full)
-
Weight: Approx 1.5kg unbuilt w/o plate (depends on what blockers you used
-
Color: Titanium Silver / Angelite Blue (light blue)
The mounting system
The goal of the Typ 60 O-ring mount is to not have it pressure mounted from the sides instead it will just sit on the mounting points and the pcb and plate will be held together by the top blockers with minimal compression. This helps us to make full use of the O-ring softness/elasticity properties without it being too compressed, providing a softer and bouyant typing feel
PCB specification Designed by Kopibeng
QMK and VIA compatible
Solder PCB
-
Universal layout supports 6.25U, 7U and ISO (refer to picture below)
USB-C daughterboard (ai03 unified C3 DB)
-
1.2mm with OTD 365 mini flex and relief cut style PCB(tentative 1.2mm/1.6mm)
Red solder mask (tentative)
-
PCB/Plate supported layout
Parts and Internals
Transparent view of the case
Exploded view render
Exploded view w/o pcb and o-ring
PCB and plate
Kitting configuration includes
CNC keyboard case (Anodized)
-
Stainless steel weight (Sandblasted and coated)
-
Stainless steel blockers WK, WKL and HHKB (Sandblasted and coated)
Twill carbon fiber plate (Full plate)
Custom strip rubber feet by Geonworks
Solderable PCB + daughterboard
Misc kit screws and o-rings (duro tentative)
-
Full set of genuine cherry clip-ins stabilizers /w 6.25U and 7U wires
-
Custom hard carrying case /w custom cutout to store all blockers
Carrying case with custom cutout and etc/
Sales format -
In-stock sales - 120 units @ axiomstudios.shop (Somewhere between Q4 2022-Q1 2023)
-
FCFS in-stock sales FCFS/Raffle (Most likely FCFS which but ill leave it tentative as for now
Price: 450 USD
Typing test (Youtube/archived from my VOD)
Stock poseidon switches (Linear) with CF plate
Dark
jades lubed on stem (Tactiles) with CF plate
Titanium
Silver with JWICK full nylon blacks vs JWICK full nylon
T1
Typ 60 x GMK Mictlán x Kneedeep edition with JWICK
full nylon blacks
Titanium Silver with JWICK full nylon
T1
FAQ
More
Q: Why no other plate design or material?
A: It’s an
in-stock sales hence i would prefer not to stock other plate
in various material. However, files will be release to the
public after the sales and yes we love CF since 2020.
Q:
Why offer all blockers? Can I choose what I want?
A:
Actually previously my thought that I would offer blockers
based on user selection, but offering in stock would be
difficult to gauge how many of you wanted certain blocker.
Hence, since we had plans to change the design of the
blocker. At most we would offer fixed WK and WKL as a kit
and HHKB as optional as it is where the design clashes
with.
Q: What did you change in V2?
A: Added
weight on the back, change how the interior design and added
alignment pins, try out different colors and also shorter
ledge on the side.
Q: What did you change in V3?
A:
New blockers, and some internal fine tune adjustment made.
Special thanks to
Elaine from
SingaKBD
Kopibeng
Geon from Geonworks
Lbaron
from Smith and Runes
Folks who supported us along the
way and attended gathering to test out the Typ 60 proto (was
quite a bit of fun)