类型: IC
作者: paulgali
发布时间: 2021-12-02 12:14:20
更新时间:
2022-02-12 06:09:23
原链接:
https://geekhack.org/index.php?topic=115520.0
Hey Geekhack! baul here, finally bringing Safa to
the public!
GB link
Safa is intended to be a lightweight,
simplistic take on the TKL form factor (i.e. it’s just a
rectangle), with my primary focus being feel and sound.
There’s
no real backstory here, I wanted to make a TKL and now I’m
here to share it with you!
شكراً
صفاء is
Safain Arabic, meaning purity / serenity.
Pricing
(Extras pricing in EU is subject to updates,
everything else is final)
VAT included everywhere
excluding US
***LIMITED TO 2 PER HOUSEHOLD
Unit allocation
MKBEU - 400 minus the below counts (255)
HEX -
100
Rectangles - 15
Basekeys - 30
Specs
5 degree, 88 key (F13) TKL.
Winkey and WKL
-
Adjusted front height of 18.5mm (excluding case feet - 3M 8mm bumpons)
Primarily top mount, secondary gummy worm
-
Fixed ANSI, ISO plates. Variable JIS Plate available (4.5u stabs are being worked on to possibly ship with this in time, but we still need a lot of testing. Prayge for it). Default plates will be Alu 5052 in case matching colors.
-
Additional polypropylene (PP) plates will be available. Specifically chosen for its more dampening effect over PC
-
Aluminum half plates are being worked on. I have tested fr4, it feels amazing but Alu will help mods. I will confirm this at a later date[/i]
-
Internal brass weight only - not exposed externally. I live in sandland, its hot, humid, and I never look at the bottom of the board. If its on my desk how can I? I wanted this to change the sound of the board, no other reason.
-
The weight and board overall were tuned to deliberately have reverberation throughout the case. No foam will be sold with this. If you want a quiet board, like my own preferential build, use PP plates with cherries or gat milk tops. Trust me
-
Color options*
432c Dark Grey
533c Navy
188c Dark Red
E-White
Silver / clear coated ano
-
Raw (no ano)
[/list]
The green seen below was done for protos but will not be in the GB.
Alu plates will be matched to case color by default - Red alu plates are also an option.
PP plates will be black. If you want colored PP plates, get some spray paint and mod it
More
The PCB is a monster
Solder PCB only, but Safa will be compatible with
Gondo’s hotswap 88 when he releases it.
Featuring north
AND south facing space stab support, ANSI, ISO, JIS (both
4.5u and 3u), I have updated the configs for VIA to include
this (see here:
https://imgur.com/a/jvQMewU)
Prototype Photos
432c Proto, Built in JIS 4.5u. The grey is very dark,
so much that I have decided to not run a black variant of
the board (at least for now).
Samples of the 533c Navy and 188c Dark Red.
Please bear in mind, these are V1 protos. Read “The
original Safa” for more info.
A look at the bottom, and engraving, which are not
infilled stock. I recommend oil-based Acryllic paint to get
a similar effect to how it looks on the JIS build
This green will not be in the group buy.
A few QOL insights…
Brass weight coverage -
made to cover as much of the alphas as possible. Being
such a low profile board has its limitations, and this was
as much coverage as I could reasonably achieve
Alignment pillars -
a simple way to assemble the case and not worry about
alignment. These cover both the X and Y axis’
USB tolerance -
uh…yeah…kinda obvious. Also helpful for locating the port
when not looking directly at it, as the entire ledge leads
to this point.
The original Safa
More
The initial design from October 2020 was intended to have a
simple external profile, which has carried over to v2. Each
unit had 8mm uniform bezels and were all WKL units I tried
to make it work, but I was not happy with the aesthetic
result. Note the engraving changes as well, you can see in
the prototype photos noted above
***The following
changes were made from v1 to v2
- AFH reduced to 18.5-19mm from 20.5mm. Small, but significant change for comfort at such an angle
- Side bezel reduction, likely what takes this from being an okay board to something that looks significantly sleeker
- Engraving updates rounded off, cuter font
- Engraving location moved to inner radii of Pause key
- Weight rework lower case height, therefore thinner weight. However, weight now covers more surface area in return, giving a more balanced tone across all alphas
- USB rework: up 1mm on y axis. Now there is a groove on the back ledge to easily identify the location
- Plate tolerances: much much tighter on north and south sides. Still room for wiggle, may tighten, but this will increase the risks of fitting
Price target & availability
-
Price target: $400 (or under) excl. VAT. This price is heavily dependent on material cost and factory limitations being put in place. Hence, this is a target - It can go up or down by the time February rolls around.
Will ship in custom fit hard cases.
Availability: 400 units See below
-
Feb 14th for GB
Quote from: paulgali on Wed, 08 December 2021, 02:24:17 After listening to people in the hobby I have the utmost respect for, as well as advice provided by vendors, this is no longer an unlimited run, and will instead be capped at 400 units (+ extras for backup).
One (very) good outcome to this is an estimated ETA of 6/7(ish) months for board production. I would rather deliver a board faster at the same price than wait a year. I am keeping this to 400 to allow me to release a possible F12 version sooner than expected, so if you prefer an F12 variant, keep your eyes out for it (ETA Q4 2022) -
Vendors*
EU, worldwide - MKBEU
Asia - Hex.KB
India - Rectangles.store
-
Considering other vendors - this list is not final
-
Soundtests*
https://www.youtube.com/watch?v=6pGhf0mRoGE
https://www.youtube.com/watch?v=eFWezluM5dM
https://youtu.be/9EkjwVae_2M
https://www.youtube.com/watch?v=8Y_Vnjhn_80 -
Credits*
-
David & Evy*- awesome PCB work, as well as general guidance
-
The entire MENA server* - for having my back throughout the past year
-
Boyos* - you know who you are, thank you for the constant encouragement
-
g1lbrt, Hueth, Lovi, Poesjuh, Simone* - For your testing, building of protos, and honest feedback
-
Bachoo*- for your early render work, as always, much love
-
**Discord
***Its my house, don’t smash the doors in!
-
Support this project by adding this to your signature <3
Code: [Select]
[url=https://geekhack.org/index.php?topic=115520.0][img width=275 height=120]https://EnterEnter.oss-cn-shanghai.aliyuncs.com/geekhack/115520/ntJaJ1c.png?x-oss-process=style/EnterEnter[/img][/url]