类型: IC
作者: SmoothFaces
发布时间: 2021-06-28
07:27:25
更新时间: 2021-10-25 05:25:25
原链接:
https://geekhack.org/index.php?topic=113534.0
Update (October, 25) - KBDfans just uploaded the IC for the RGBKnob on their site! Go check it out and reserve yours:
KBDfans IC
Update (July, 5) - Updated the Q&A with questions
related to Wireless/Bluetooth, Vial software,
Polycarbonate and more. (Go to the last part of the IC to
view the Q&A)
RGB Knob Google form
Introducing the
RGB Knob
by SmoothFaces
Firmware
The RGB knob will run QMK firmware.
While
basic configuration can be done via VIA Config, to make the
most of your RGB Knob this will need to be done with custom
code so that a bigger variety of controls can be added for a
smoother and more enjoyable experience. Commands such as
double press, press & rotate are some of the ones being
currently added and tested.
It will come flashed so all
you need to do is plug and enjoy!
Colors & material
Body color options: Anodized 6061
aluminium (for pastel lilac, black and other/*) &
e-white (electrophoresis)
Knob color options & material: Anodized 6061 aluminium
(for pastel lilac, black and other/); e-white (electrophoresis); Stainless steel miror
finish; Polycarbonate
(/
- there will be a fourth color. For that, we invite you to
join our google form below so that you could help pick the
one. The most voted one will be the final decision after
manufacturer confirmation.)
Size and dimensions
As small as the palm of your hand,
the RGB Knob is a super compact and minimalistic looking
controller that will fit anywhere, anytime.
The RGB
Knob consists in 6 individual parts: Bottom piece, Top
piece, Knob, PCB(with ec12 encoder), PC light diffuser and 2
rubber feet.
Ugh, screws!
Besides internal ones, we don’t like to
see exposed screws on our products. For that reason we
decided to use magnets to secure and hold the case closed.
Both the bottom and top part come with 4 magnets on each
corner that secure them together. To connect the parts,
simply let the top piece fall above the bottom one (see
video below). To disconnect it, hold down the knob and push
the top part up.
The RGB Knob will only use 3 screws. 2
to hold the pcb inside the case and 1 to secure the Knob
into the encoder. Without it, the knob would be wobbly and
not offer a comfortable movement when rotated. That’s why
the knob has a hole on the side.
Gallery
More
Prices and details
Price: We intend to keep to the RGB
Knob at a price of around 85usd + cheap and reliable
shipping, if we reach the MOQ of 150 unities
GB Date:
As soon as we gather enough interest, we will be ready to
start.
Vendors: working on that.
Q&A
Wireless mode?
For the moment, no.
Although we thought about it before starting the project we
decided to keep this first round without bluetooth. Not only
to keep the price cheaper but also because we wan’t to bring
the second version of this volume controller (R2) in the
future, with a higher amount of features such as a numpad
and lot’s of new things to come with wireless version.
Add
an Oled as a layer indicator?
Exactly the same answer
as above. Highly considering that for the next one.
Will
you be using Vial software for a wider range of knob
controls?
YES.
Polycarbonate case?
As you
mightve seen, we posted some pictures with the full body PC
material. As much as we would wish to offer that version we
are not offering it for the moment as we are not satisfied
with what the manufacturer delivered. We tried to sand by
hand to get a cleaner but corners didnt get as we wished
We
will definitely have that on the second version of this
project, very soon.
Can the knob be taller?
Yes,
it can. The knob will come in the lowest position. But you
can easily make it (around) 1cm taller by adjusting the
height it is sitting at.
Special mentions
There are tons of people we want to
mention because of their support, assistance and continuous
help to develop this product. Here will mention all we can
remember, in no specific order.
e11i0t23, Saurabh, Sam
Buddy, ai03, Pylon, UltraSafe, Nabzio, Darth, Hopkin, Miyo,
s.nagy, Crokto, kakan, Proph and all the people from the
Keyboard atelier server.
If you want us to bring this project to life sooner, please
fill the google form bellow.
That would be of great
help to us
RGB Knob Google form
SmoothFaces Discord
Code: [Select]
[url=https://geekhack.org/index.php?topic=113534.0][img
width=306 height=112]https://i.imgur.com/kyBaAox.png[/img][/url]
Link if you want to use our signature thumbnail