类型: IC
作者: Garner
发布时间: 2021-04-25 14:48:05
更新时间:
2022-02-10 12:12:11
原链接:
https://geekhack.org/index.php?topic=112488.0
Haven60by Garner
Unique & Customizable
Designed
to be compatible with standard 60% PCB’s with USB-C located
at the top left corner.
Split shift, split space or
split backspace? ANSI or ISO? Arrow keys or HHKB? It’s all
possible.
GB LIVE FROM FEB 10th TO MARCH 11th!
Join us on Discord or Instagram to receive news and
dicuss the project.
Supported Layouts
PCB plate will be available in
aluminum, brass and polycarbonate.
Revamped Top Mount Concept
This mounting system
provides a combination of gasket mount and top mount.
The
idea is that the cylindrical rubber gaskets will allow the
board’s flex to be
adjustable.
More details and showcase further below.
Group buy info
This keyboard is sold without PCB and
comes with a plate that supports a wide range of layouts for
maximum customizability.
Make sure your PCB supports
the listed layouts above and have USB-C placed at the top
left corner (the GH60/dz60/pok3r standard).
I
have compiled a list of compatible PCBs further below, (and
I’m sure there are more).
There is also a matching
custom wrist rest to be offered as well as a carrying case
with cutout for both the keyboard and the wrist rest!
Vendors
US:
Mechs& Co.
- 95 units
EU:
CandyKeys
- 50 units
CA:
Desk[H]ero
- 50 units
ASIA:
Zion Studios
- 50 units
GB goes live on Thursday February 10th,
FCFS.
Pricing
Base kit: $310 USD
Includes
full keyboard kit with WK or HHKB top, gaskets, fasteners,
aluminum plate and case foam.
Options: PCB Foam +$25
USD Brass Plate +$30 USD PC Plate +$35 USD
Carrying case
+$40 USD
Matching Wrist rest
+$80 USD
Extras / Additionals: Extra Aluminum
plate +$25 USD Extra Brass plate +$40 USD Extra PC plate
+$45 USD
MOQ
Keyboard: 100 units
Wrist rest:
40 units
Carrying case: 25 units
Technical information Keyboard Size: 60% Case angle: 6°
Weight: ~1.8kg unbuilt (4lbs) Front Height: ~20mm (0.78”)
Case Material: Anodized aluminum PCB Plate Material:
Aluminum, brass and polycarbonate Gasket material: EPDM
(high quality closed cell rubber) Wrist rest material:
Anodized aluminum with clear polished polycarbonate
Timeline
Final dispatch is expected 4-6 months
after GB has ended.
Available Finishes
Featured with the optional wrist
rest.
The pictures below are only renders, for accurate
colors, please see the prototype photos further below.
The
single color finishes are the same colors as the bottom of
the two-colored versions.
Ocean Blue
Earth Brown
Stone Grey
Marine Blue
Champagne Beige
Night Black
Prototypes
Ocean Blue
Full album
Stone Grey
Full album
Earth Brown
Full album
Prototype Tests
Build VOD by Alexotos here (Summary around 1:40:00)
Typing test from Alexotos: Polycarbonate plate
Typing
test from Filledtypes: Brass plate
Sound test (1st
Prototype): Polycarbonate plate
Flex configuration
Haven60’s flexibility can be
configured by simply adjusting the tightening of the plate
screws, below are a few examples to show the span of
possible flex.
Going for high flex requires you to skip
case foam.
Album here
What’s unique is that this flex is not achieved by
relief cuts or bending the plate from fixed points.
Here
the entire plate is allowed to move vertically thanks to the
synergy between cylindrical rubber gaskets on the screws and
the top frame gasket.
Which means there is less stress
applied to the PCB as it isn’t being bent as much.
Maximum flex
~3mm screw distance (m3 screw as reference) | Polycarbonate
plate | PCB foam | No bottom case foam
Low flex ~1.5mm screw distance (half
m3 screw as reference) | Polycarbonte Plate | PCB foam | No
bottom case foam
No flex Screws fastened just until
you start gettting a bit of resistance | Polycarbonate Plate
| PCB foam | Bottom case foam
FAQ and other information
Does this keyboard include
PCB?
No, this case is designed to fit 60% PCB’s sized
according to the standard poker / gh60. You can have
your own choice of PCB as long as its layout are compatible
with my PCB plate.
I have test mounted several 60% PCBs
during the prototype stage.
Confirmed fits so far:
DZ60
rev. 3
DZ60 RGB v2 Hot Swap
BM60 RGB Hot swap
XD60
H60
from Hineybush
NOP60 from Checkerboards
Who are
you?
I’m based in Sweden and started Garner as I fell
in love with this hobby and wanted to bring more unique
keyboards to the hobby.
My design philosophy is to
stand out from the mass and bring new interesting designs to
the table.
Working in CAD is a big part of my daily
job. My daily job consists of providing customer tailored
solutions (CAD-based drawings), product development,
drawings for suppliers, etc.
I have a degree in design
and product development and have always been a creative
person who have done lots of personal media projects for fun
throughout my life.
How can we contact you /
receive news about this and future projects?
You can
join the Discord channel
here.
And follow my Instagram
here
Forum signature code below if you’d like to support
the project.
Code: [Select]
[URL=https://geekhack.org/index.php?topic=112488][img width=450 height=120]https://i.imgur.com/sKJkeSX.jpg[/img][/url]