类型: IC
作者: whezil
发布时间: 2021-01-22
19:30:57
更新时间: 2021-02-02 02:55:08
原链接:
https://geekhack.org/index.php?topic=110802.0
ELLYA - Linear/Tactile Keyboard
I would like to introduce you to Ellya, a premium
keyboard based on the Alice layout.
Just like switches
I would like to offer two different variants of Ellya, one
Tactile and one Linear.
The Tactile Variant which will
include the horizontal ridges across the board
And the
Linear Variant which will have a smooth surface finish.
Ellya
- Tactile Variant
(Note: This was a version 0.1
prototype of only the top plate.)
Ellya - Linear Variant
(Note: These are renders
I do not have a prototype of this variant yet.)
First IC form:
https://forms.gle/3pygktRM5vNCAkwKA
The Build:
Mounting: Gasket Mount
Colors:
TBA
Plate Material: Waiting for feedback from IC
Form
PCB: Not yet designed-
Waiting for feedback
from IC Form but will include a USB C daughter board, ESD
protection and will be QMK configurable
Rotary
encoder/s: Waiting for feedback from IC Form(see below for
more details)
Hot swap: Waiting for feedback from IC
Form (Soldered version/hot swap version)
RGB: Waiting
for feedback from IC Form (No RGB/ Per key)
Rotary
Encoder/s:
In the design of the PCB I plan to allow for a switch
or rotary encoder to be soldered into place - you can choose
if you want to solder a rotary encoder in place or not
PCB
Design Option 1: 1 Optional Rotary Encoder positioned at 1
indicated in the picture above.
PCB Design Option 2: 3
Optional Rotary Encoders positioned from 1 - 3 indicated in
the picture above.
Extra Info :
Length:
180mm/7.087inches
Width: 400mm/15.748inches
Peak
Height: 27mm/1.062inches
The markings on the Tactile
Variant are not steps, they are ridges and are not sharp so
they will not cut you.
Images of the Tactile Ellya
Variant:
https://imgur.com/a/nDDtGvP
Renders of the Linear Ellya Variant:
https://imgur.com/a/j9VvASj
If you have any suggestions please fill out the IC
and let me know what you’re thinking.
If this IC does
well then I will do a limited once off GB, no R2, one run
only.
If I have any updates/changes to make, I will be
posting them here.
If you would like to support my IC
you can copy and paste this into your signature:
Code: [Select]
[url=https://geekhack.org/index.php?topic=110802][img width=275 height=120]https://i.imgur.com/HXLUDGl.png[/img][/url]