类型: IC
作者: fricked
发布时间: 2020-09-23
16:58:16
更新时间: 2020-09-23 16:58:16
原链接:
https://geekhack.org/index.php?topic=108737.0
This is an interest check for an IBM Model M to F
conversion kit.
**The purpose of this mod:**to replicate the superior
Model F internals in the superior layout and availability of
the Model M.
The kit would include:
- (110x) Model F flipper (reproduction; not an original IBM part)
- (110x) Model F spring (reproduction; not an original IBM part)
- (1x) M2F PCB
- (1x) QMK xwhatsit Controller
The process would be fairly
straight-forward, though bolt/screw mod experience would be
a plus:
1: acquire an IBM Enhanced Keyboard (Model M
with the standard 101-105 key layout)
2: disassemble
the keyboard including the inner assembly (chopping off
remaining rivets)
3: cut away a couple nubs on the
underside of the M barrel plate to make room for some of the
flippers (no big deal, it will still look and function the
same and can always be reverted to an M)
4: put the new
springs on the new flippers, put these in the barrel plate,
and replace the membrane with the new PCB
5: reassemble
the keyboardassembly; bolt/screw mod is necessary, I
recommend bolt mod
6: attach the controller to the PCB
(will probably need some basic soldering) and screw it into
the back plate
The kit would be for the standard layout
Model M (101-105 key) only; I will be happy to do a 122-key
and SSK version if this project is a success.
Price would be $80 USD + plus shipping & applicable
taxes/duties.
Discord server: will make one if there is interest
If you are potentially interested in buying a kit, please
fill out this quick survey:
https://forms.gle/oz6EXbdKAtyEKZAu7
This is important; I need to know there is enough
interest before this project can become a reality.
Original
thread is over on Deskthority:
https://deskthority.net/viewtopic.php?f=7&t=24559