Hike News
Hike News

【IC】F100DGATE 100％ Keyboard

IC, 键盘 本文总阅读量次

类型: IC
作者: blackriver
发布时间: 2020-02-22 10:41:12
更新时间: 2020-03-03 20:28:57
原链接: https://geekhack.org/index.php?topic=104791.0

FLOODGATE v0.2
Hello everyone,
I have taken your feedback to heart and revised my initial design quite a bit. After getting feedback I have learned a lot more about what people want and what they do not. Many people did not like some of the previous design elements and for the most part I was in agreement with them. I would really appreciate it if you gave me some more feedback via this survey (I apologize for the repetitive questions, I decided to post on reddit as well so I asked some of the same things). Keep in mind, the listed features are subject to change as I do not know for sure what manufacturing / raw material costs will be. So as a brief overview here are a few key things about this case:
Notable design changes: Deep cuts on bottom corners were exchanged for smooth chamfers which still mimic the concept of the original, but are much more elegant. The cutout for the old “Logo” :)) was removed and so was the old design. Instead it has been replaced with a cutout for a brass weight with the new logo in its place. Also taking the place of the old logo is an F13 / Macro key which can really be for whatever the end user desires. Additionally I extended the pen / pencil channel and brought it out to the edges.
Features

  • Sandwich Mounted Design with O-Ring Spacers for mild vibration absorption
  • Two Brass / Stainless Steel weights based on buyer preference of material
  • Plate options in Stainless, Brass and Color Matched Aluminum
  • ISO and ANSI layout support
  • USB Type C
  • Full 100% Layout + F13 / Macro Key
  • PCB Mounted Stabs
  • PCB will use ATMEGA32U4 or AT90USB1286 chip
  • 4 degree angle with risers to accommodate 7 degrees
  • Top slot intended for pencils or pens
    Unknowns
  • Production / Retail Cost
  • Material Cost
  • Exact PCB Design
  • Skid Pads Shape / Size
  • Riser Design
  • Release Date (Totally unknown could be never depending on demand)
    Dimensions (Will Release a Schematic Eventually)
  • Main Case in mm: 460 W x 140 D x 28 H (At highest point including skid pads)
  • Front of case is 24 mm high including skid pads
  • Bottom Brass Plate in mm: 150 W x 50 D x 7 H
  • Top Brass Plate in mm: 60 W x 20 D x 8 H
    https://imgur.com/pYL1G3k
    https://imgur.com/qGN8V1x
    https://imgur.com/OMnAJnj
    https://imgur.com/wjznkDG
    https://imgur.com/7Rip7S3
    More

FLOODGATE v0.1
Hello everyone, I would like to introduce you to a project I have been working on. Please keep in mind that this is currently in the very early stages of development as of 2/22/2020 and is by no means the perfect product I intend on delivering once I am ready to bring it to the market.
Meet F100DGATE, it is a 100% Keyboard that will consist of 3 main components + the PCB. After feeling like there is not enough love in the keyboard market for a 100%, I felt the necessity to design something. The keyboard will be an ANSI layout. As you can see the plate extends all the way to the edge providing a nice aesthetic as well as a showcase of the unique materials I plan on offering for the with this keyboard. On the top of the case, you will notice a slot above the F5-F12 keys, while this is admittedly more of an aesthetic touch to the board, this is also a tribute to many boards in the past that had a dedicated pencil holder. I have always been a fan of retro designs and I felt that bringing a modern approach to a classic concept would be an interesting touch. As I previously mentioned, this is by no means an accurate depiction of the final product, just more of a concept I would like to get feedback on. Listed below are other notable things I did not mention, as well as some things I plan to change or add in the future.
**Please fill out the survey listed below whether you are interested or not in this keyboard. I will continue to update you with information regarding the process as well as with new renders as I continue to modify and enhance the design.
**
[https://docs.google.com/forms/d/e/1FAIpQLSeL2k9q2eHGxSKIscBEg7IRnPNZNGVJTQfuxf9mjRlmM6Ggsw/viewform?usp=sf_link]https://imgur.com/pYL1G3k[url=http://](https://docs.google.com/forms/d/e/1FAIpQLSeL2k9q2eHGxSKIscBEg7IRnPNZNGVJTQfuxf9mjRlmM6Ggsw/viewform?usp=sf_link)

More
FLOODGATE v0.1
Hello everyone, I would like to introduce you to a project I have been working on. Please keep in mind that this is currently in the very early stages of development as of 2/22/2020 and is by no means the perfect product I intend on delivering once I am ready to bring it to the market.
Meet F100DGATE, it is a 100% Keyboard that will consist of 3 main components + the PCB. After feeling like there is not enough love in the keyboard market for a 100%, I felt the necessity to design something. The keyboard will be an ANSI layout. As you can see the plate extends all the way to the edge providing a nice aesthetic as well as a showcase of the unique materials I plan on offering for the with this keyboard. On the top of the case, you will notice a slot above the F5-F12 keys, while this is admittedly more of an aesthetic touch to the board, this is also a tribute to many boards in the past that had a dedicated pencil holder. I have always been a fan of retro designs and I felt that bringing a modern approach to a classic concept would be an interesting touch. As I previously mentioned, this is by no means an accurate depiction of the final product, just more of a concept I would like to get feedback on. Listed below are other notable things I did not mention, as well as some things I plan to change or add in the future.
**Please fill out the survey listed below whether you are interested or not in this keyboard. I will continue to update you with information regarding the process as well as with new renders as I continue to modify and enhance the design.
**
[url=https://docs.google.com/forms/d/e/1FAIpQLSeL2k9q2eHGxSKIscBEg7IRnPNZNGVJTQfuxf9mjRlmM6Ggsw/viewform?usp=sf_link]https://docs.google.com/forms/d/e/1FAIpQLSeL2k9q2eHGxSKIscBEg7IRnPNZNGVJTQfuxf9mjRlmM6Ggsw/viewform?usp=sf_link]
More

FLOODGATE v0.1
Hello everyone, I would like to introduce you to a project I have been working on. Please keep in mind that this is currently in the very early stages of development as of 2/22/2020 and is by no means the perfect product I intend on delivering once I am ready to bring it to the market.
Meet F100DGATE, it is a 100% Keyboard that will consist of 3 main components + the PCB. After feeling like there is not enough love in the keyboard market for a 100%, I felt the necessity to design something. The keyboard will be an ANSI layout. As you can see the plate extends all the way to the edge providing a nice aesthetic as well as a showcase of the unique materials I plan on offering for the with this keyboard. On the top of the case, you will notice a slot above the F5-F12 keys, while this is admittedly more of an aesthetic touch to the board, this is also a tribute to many boards in the past that had a dedicated pencil holder. I have always been a fan of retro designs and I felt that bringing a modern approach to a classic concept would be an interesting touch. As I previously mentioned, this is by no means an accurate depiction of the final product, just more of a concept I would like to get feedback on. Listed below are other notable things I did not mention, as well as some things I plan to change or add in the future.
**Please fill out the survey listed below whether you are interested or not in this keyboard. I will continue to update you with information regarding the process as well as with new renders as I continue to modify and enhance the design.
**
[url=https://docs.google.com/forms/d/e/1FAIpQLSeL2k9q2eHGxSKIscBEg7IRnPNZNGVJTQfuxf9mjRlmM6Ggsw/viewform?usp=sf_link]https://docs.google.com/forms/d/e/1FAIpQLSeL2k9q2eHGxSKIscBEg7IRnPNZNGVJTQfuxf9mjRlmM6Ggsw/viewform?usp=sf_link[/url]
Other Features

  • PCB geared towards use with the ATMEGA software
  • PCB Mounted Stablizers
  • USB Type C located on the back left side just below the space between the esc and F1 keys
  • Powdercoated Top and Bottom case
  • Polished Steel Plate, Copper Plate, Powdercoated Plate options
  • Plate matched insignia on the bottom of the board
  • 4 degree case slant

Possible Improvements

  • Hot Swap
  • Alternative plates for ISO etc.
  • More rounded edges (Uncertain on this, but looking for your feedback)
  • Slightly thinner bottom case (Currently the keyboard sits just around 1” high in the front)
  • Other materials
IC, 键盘