类型: GB
作者: GL1TCH3D
发布时间: 2016-01-09 08:38:30
更新时间:
2016-04-21 17:59:43
原链接:
https://geekhack.org/index.php?topic=78510.0
April 21st, 2016 update
http://goo.gl/forms/uUzQDlqKrA
This is the final confirmation or change of address
form. It is not required that you submit this form. If you
do not submit this form, the original address that you
submitted for the group buy will be used (not Paypal’s
address).
Greatfirewall has informed me that packing is
just about done and shipping from China will arrive a week
after it’s shipped.
Thanks, GL1TCH3D
MARCH 8TH,
2016, PLEASE READ
Update!
Got news that the cases
are now completed and just waiting on the PCBs before
shipping everything out.
livingspeedbump has also
agreed to receive the order from china to distribute the USA
orders (the bulk of the orders) so depending on the shipping
from china and PCBs, it might be possible to have the USA
orders delivered before the end of April.
However this
will most likely not result in shipping discounts, but I’ll
have to tally that up in the end to see if there’s money
from the shipping fund to send back.
If anybody has an
issue with this please bring it up before the order is
shipped.
Thanks, GL1TCH3D
March 3rd, 2016
The
order was placed successfully with the factory producing the
parts in February.
This pushes back the estimated
delivery. So far we’re looking at a completion of production
around mid-late March. If I estimate shippng of around 2
weeks that means that the parts would arrive to me early-mid
April. However my exam period starts mid-April which will
slow down distribution / sorting.
Shipping to North
America tends to be within the week once shipped.
Another
note: there were some fees that were not negotiated on
beforehand. GFW agreed to eat them this time since the
invoices were already paid (and it would just be problematic
to try and hunt down an extra $3-4 a person) but if there is
a round 2, the price will increase marginally.
Thanks,
GL1TCH3D
Previous update:
More
Invoices have been sent!
If you have questions or
comments let me know.
If you are not in Canada or USA
there are cheaper untracked options than what are on the
invoice, message me about those and any other notes that you
would like to add (such as customs declarations).
Additional Acrylic sets available at $25 + fees each and
will be invoiced separately. If you wish to purchase one,
send me a PM about it
Number of invoices sent out: 61 (including
cancellations)
Number of Cancellations or unpaid: 7
Number
of payments: 54
How to flash the keyboard:
More
Step one: Go to
http://www.enjoyclick.org/tkg//#. This is the site that will be building the main firmware
for the board.
Step two: Choose the Kimera as the
keyboard (not the two headed)
Step three: Click the
config button and replace the text in the “matrix mapping”
box with the following code
http://pastebin.com/Bf2uQWHv
Step four point one: Go to keyboard layout editor and
setup your mapping
http://www.keyboard-layout-editor.com//#/gists/83b7eb12b3bccdf4c55d
Step four point two: When you’re making your layouts,
make each layout separately AND INCLUDE BOTH LEGENDS. For
example, the “.” key requires the “.” and “>” in the
mapping to work. See the help section on enjoyclick for all
the symbols to use
http://www.enjoyclick.org/tkg//#help
Step five: Paste the layouts for each layer into the
corresponding boxes on enjoyclick
Step six: Choose your
fn options. NOTE: fn covers a wide range of options
including LEDs, not just changing layers.
Step seven:
See the following for details on the LEDs
http://pastebin.com/zSVN4f9j
Step eight: Download your firmware as a .eep file
Step
nine: From the following toolkit,
https://github.com/kairyu/tkg-toolkit, download the files in the windows tree.
Step ten
point one: Run the batch file “setup.bat” from the toolkit.
This only has to be done the first time you’re flashing your
board.
Step ten point two: The options tree is as such
“12Kimera core>N>1.Default>1.ateml_dfu”
Step
eleven: Click the reset button on the golbat PCB (it’s on
the back).
Step twelve: Run “zadig_2.1.2.exe” and
Install the Driver (Not WCID). This only has to be done the
first time you’re flashing the golbat.
Step thirteen:
Drag and drop the .eep firmware file that you created onto
the batch file “reflash.bat”
Step fourteen:
Step fifteen: Profit
That’s all folks! If it
doesn’t flash correctly just try again. It didn’t work
properly the first time I flashed (not sure why). Just did
it again and it worked.
Original group buy text:
More
Heya guys
I’ve had a lot of interest for the Golbat 40%
board.
The official GB form will be available within
the next week.
http://goo.gl/forms/py9BwzHIUI
The form is closed for the time being.
When the
form opens and you go to submit your application there’s
going to be a big wall of text right at the start and is the
same as the quote below.
Quote PLEASE READ. BY ORDERING
YOU AGREE TO THESE TERMS and details.
This is the
submission form to PURCHASE the Golbat 40% kit in the group
buy.
Invoices will be sent out on January 21st, 2016
and payment must be received by January 22nd, 2016 to hold
the spot.
A waiting list will be formed to fill the
spots that are unpaid.
The order is FIRST COME FIRST
SERVE. Meaning that the first submissions will be the
highest on the list and the first to ship once the order
arrives.
There are 50 orders for round one. One kit per
person / household / username.
If you are taking the
soldering service you must send me the LEDs / switches
/stabilizers yourself. I will send my postal box information
with the invoices should you choose this option. I will
refuse any packages that have a customs charge attached.
Mark your parcels as a gift for $20 to ensure there is no
problem with customs.
If you’re asking me to do the
soldering service there is NO GUARANTEE of delivery time. I
can only do them as my work and school schedule allow.
The
PCB comes presoldered with the diodes and resistors so the
only thing you need to make the board work is switches,
stabilizers and a USB cable. However there are no switches,
stabilizers, cables or LEDs included in this group buy.
The
kit includes: 1 top plate (2 if you purchase the normal +
HHKB option), 2 mid acrylic layers (one goes above the PCB
and one goes under the PCB), 1 bottom plate and 1 PCB with
resistors and diodes soldered on.
I am only the
distributor in this deal. I will place the order for the
kits and ship / distribute the kits. The wait time between
ordering the kits from China and receiving them here in
Canada is between 4-6 weeks. For that reason you must agree
to waive your right to disputing the payment through PayPal
since it is not possible for me to ship within the PayPal
time frame.
Defective units will be handled in a way I
deem most appropriate.
This could be offering partial
refund or a different, spare part at your choice or,
depending on the severity of the defect, request replacement
parts from the manufacturer in the second round of
orders.
The keyboards are custom order so once the
order is placed / payment is received there will be no
refunds if you decide to change your mind or anything of
that sort.
The standard Golbat 40% set will cost $80USD + fees and
shipping.
For an extra $15 the HHKB plate will be included (so
you’ll get both the standard plate and the HHKB style
plate). This is $95USD + fees and shipping.
Shipping it
being done from Quebec, Canada and should be $12-17USD
anywhere in Canada with insurance for $200 CDN.
To ship
to the USA the price is $15-20USD including insurance for
$100CDN. (It’s a big jump for the extra insurance).
If
you require shipping elsewhere, expect at least $40-60 to
Europe and $80 elsewhere for tracking and insurance. If you
wish a quote before ordering, send me a message before
placing the order to avoid cancellations.
Otherwise the
default option will be “cheapest shipped with tracking”
The
PayPal fees will be added to the invoice total and will be
3.9%.
Options:
Colors:
Aluminum：sliver,
black, pink, blue, green,purple, gold
http://imgsrc.baidu.com/forum/pic/item/9ec0381f95cad1c8298f95cd7a3e6709c83d51b6.jpg
Acrylic：you can choose the colors in this link：
http://item.taobao.com/item.htm?spm=a1z10.1-c.w137644-66242819.2.ZNnbyp&id=19615052779
For the acrylic, please list both the item code from
the images AND a cropped image of the specific color that
you wanted so I can double check to avoid mistakes.
Please
visit
https://geekhack.org/index.php?topic=78080.0
for all the newest information and instructions on
flashing.
YOU CANNOT CHANGE YOUR ANSWER ONCE SUBMITTED.
IF YOU MADE A MISTAKE YOU MUST RESUBMIT THE FORM AND I WILL
IGNORE THE FORM WITH THE MISTAKE. YOUR PLACE ON THE LIST IS
THE TIME OF SUBMISSION OF THE REVISED FORM.
If it’s
just a typo like missing a letter in your email address
that’s fine but if you forget to completely answer a
required question (somehow) well… that’s a different
story.
Right now the only thing I’m waiting on is for a
bit of time to go through the steps of creating and flashing
the firmware so that I can help with that when the time
comes.
I will consider offering a flashing / soldering
service for $35 if there’s enough interest to bother getting
my own soldering iron (instead of constantly going to
someone’s place to use one).
Otherwise it’s just a kit
sold as is.
All the standard questions will be asked in
the GB: Username, address, email, choice.
If you have
any more questions or concerns please raise them now before
I open the form in the coming days.
The board requires
CHERRY PCB MOUNT stabilizers. You will need 2 at 2U or 1 at
6U depending on how you want to setup your bottom row.
I
have enough 65g tactile zealios for ONE board if someone
wishes to buy those.
There are technically only going
to be 48 spots open since I’m ordering one for myself and
one is reserved to nathan who helped me build the sample.
All
the times are in EST.
Mod edit: Made it a bit easier to
see the price