类型: GB
作者: Garner
发布时间: 2022-02-07 12:21:02
更新时间:
2022-03-18 17:25:15
原链接:
https://geekhack.org/index.php?topic=116205.0
PROJECT CANCELLED - MOQ NOT MET.
YOUR PURCHASE WILL BE
REFUNDED FROM YOUR VENDOR, REACH OUT TO THEM FOR QUESTIONS
OR ISSUES.
Haven60by Garner
Unique & Customizable
Inspired by vintage Victorian furniture, the Haven60
gives a unique impression on the desk with its bold and
curvy design.
Haven60 is designed to be compatible with standard
60% PCBs to support a wide range of layouts and allows you
to use a PCB of your own preference.
This way the
keyboard supports anything from split spacebar and split
backspace to arrow keys and HHKB. Both ANSI and ISO.
Supported Layouts
PCB plate will be available in
aluminum, brass and polycarbonate.
Revamped Top Mount Concept
This mounting system
provides a combination of gasket mount and top mount.
The
idea is that the cylindrical rubber gaskets will allow the
board’s flex to be
adjustable.
More details and showcase further below.
Group buy info
This keyboard is sold without PCB and
comes with a plate that supports a wide range of layouts for
maximum customizability.
Make sure your PCB supports
the listed layouts above and have USB-C placed at the top
left corner (the GH60/dz60/pok3r standard).
I
have compiled a list of compatible PCBs further below, (and
I’m sure there are more).
There is also a matching
custom wrist rest to be offered as well as a carrying case
with cutout for both the keyboard and the wrist rest!
Vendors
US:
Mechs& Co.
- 95 units
EU:
CandyKeys
- 50 units
CA:
Desk[H]ero
- 50 units
ASIA:
Zion Studios
- 50 units
GB will be live from February 10th to March
11th, FCFS.
Final dispatch is expected 4-6 months after
GB has ended.
Pricing
Base kit: $310 USD
Includes
full keyboard kit with WK or HHKB top, gaskets, fasteners,
aluminum plate and case foam.
Options: PCB Foam +$25
USD Brass Plate +$30 USD PC Plate +$35 USD
Carrying case
+$40 USD
Matching Wrist rest
+$80 USD
Extras / Additionals: Extra Aluminum
plate +$25 USD Extra Brass plate +$40 USD Extra PC plate
+$45 USD
MOQ
Keyboard: 100 units
Wrist rest:
40 units
Carrying case: 25 units
Technical information Keyboard Size: 60% Case angle: 6°
Weight: ~1.8kg unbuilt (4lbs) Front Height: ~20mm (0.78”)
Case Material: Anodized aluminum PCB Plate Material:
Aluminum, brass and polycarbonate Gasket material: EPDM
(high quality closed cell rubber) Wrist rest material:
Anodized aluminum with clear polished polycarbonate
Color Options
Featured with the optional wrist rest.
The
pictures below are only renders, for accurate colors, please
see the prototype photos further below.
The single
color finishes are the same color as the bottom of the
two-colored versions.
The text on the bottom piece will
be laser engraved like the proto in the build VOD.
Ocean
Blue
Marine Blue
Stone Grey
Night Black
Earth Brown
Champagne Beige
Prototypes
Ocean Blue
Full album
Stone Grey
Full album
Earth Brown
Full album
Prototype Tests
Hyperlapse Build and Review by Alexotos!
Full Build VOD on Twitch here
Prototype build video and typing test from Zion
Studios!
Typing test from Filledtypes: Brass plate
Typing
test from Alexotos: Polycarbonate plate
Flex configuration
Haven60’s flexibility can be
configured by simply adjusting the tightening of the plate
screws, below are a few examples to show the span of
possible flex.
Going for high flex requires you to skip
case foam.
Album here
The plate is allowed to move vertically thanks to the
synergy between cylindrical rubber gaskets on the screws and
the top frame gasket.
This means there is less stress
applied to the PCB as it isn’t being bent from fixed
points.
Maximum flex ~3mm screw
distance (m3 screw as reference) | Polycarbonate plate | PCB
foam | No bottom case foam
Low flex ~1.5mm screw distance (half
m3 screw as reference) | Polycarbonte Plate | PCB foam | No
bottom case foam
No flex Screws fastened just until
you start gettting a bit of resistance | Polycarbonate Plate
| PCB foam | Bottom case foam
FAQ and other information
Does this keyboard include
PCB?
No, the keyboard is designed to fit the standard
60% PCB’s like dz60/gh60 with USB-C in the upper left
corner.
Several PCBs have been tested during the
prototype stage and I made a list of those that are
confirmed compatible:
DZ60 rev. 3
DZ60 RGB v2 Hot
Swap
BM60 RGB Hot swap
XD60
For HHKB with
split spacebar these will likely fit:
H60 by
Hineybush
NOP60 by Checkerboards
Plate files will
be released when the units have been shipped out.
How
can we contact you / receive news about this and future
projects?
You can join the Discord channel
here.
And follow my Instagram
here
Forum signature code below if you’d like to support
the project.
Code: [Select]
[URL=https://geekhack.org/index.php?topic=112488][img width=450 height=120]https://i.imgur.com/sKJkeSX.jpg[/img][/url]