类型: GB
作者:
BlindAssassin111
发布时间: 2021-10-25 12:45:02
更新时间:
2022-10-26 16:44:39
原链接:
https://geekhack.org/index.php?topic=115095.0
Viktus Sinne
by
Viktus Design
Specifications:
O-Ring/Burger Top Mount (3 mounts top, 3 mounts
bottom)
HHKB, WKL or WK Layout
Polycarbonate
case
7 degree board angle
Type-C PCB support
only (more info below)
~1.7 Kg w/brass plate
Designed in collaboration with OneCreativeMind.
Where to buy:
The GB will go live on
Viktus.Design
I am accepting US and international orders.
Dates:
November 1st, 2021 @ Noon CDT to November 30th, 2021
@ Midnight CDT
Q2/Q3 2022 delivery (depending on
order volume this might change)
Mounting:
Above is showing the O-rings on top and bottom of
the plate as designed but you can build the board with
multiple different mounting methods if you wish.
If
you want a squishier mount and are willing to redrill the
plate mount holes to ~4mm, you can use drone controller soft
mounts (silicone) and M3 set screws for alignment. (note
this will drop the plate down a bit lower than normal)
Viktus Sinne Info:
Color options:
Clear PC with sandblasted brass
plate, weight, logo
Smoked PC with sandblasted brass
plate, weight, logo
Atomic Purple PC with sandblasted
brass plate, weight, logo
Teal PC with sandblasted
brass plate, weight, logo (not prototyped yet, reference
image on the product page)
Layout options:
HHKB
WKL
WK, 7U bottom row only (with
included/sold plates)
Pricing:
Board:
- Dyed: $365
-
Clear: $360
PCB not included.
Extra Tops: $110 each (all layouts and colors. Colors may vary from your full board due to batch variance and the dye process)
Plates:
Brass: HHKB, WKL, WK, 10U WKL
Smoked PC: HHKB, HHKB half, WKL, WKL half, WK, WK half
Forged carbon fiber: HHKB, HHKB half, WKL, WKL half, WK, WK half
Quantity:
MOQ: 80
MAX: Human limit, depends on how interest goes but probably somewhere around 200ish.
Name:
The name Sinne means “mind” in swedish because of OneCreativeMind
PCB Support:
All PCBs must have USB Type-C
Tested to fit:
ANC60 v1 and v2
WT60-D
H60
DZ60
Plain60
Layout Support:
Prototype Pictures:
Full album:
Viktus Sinne prototype album
A few more amazing pictures:
NinjaPirate picture album
Build Streams:
TopClack did a build stream here.
TaehaTypes did a build stream here.
Special Thanks:
OneCreativeMind for the original concept and name along with all of the feedback and support.
Nox for helping fund the prototypes
Quakemz for helping with the first build stream and being an all around awesome person to talk with.
NinjaPirate for the unbelievably amazing pictures of my prototype.
TaehaTypes for the second build stream of my prototype.
FAQ:
Is a PCB included? I will not be including a PCB with the board. It has been confirmed to work with the AN-C (v1 and v2), Plain60, h60, DZ60, and WT60-D. Basically if it has a type-c connector it should work but I can’t test every single option.
Can you release the files so I can 3D print it? No.
Will there be an aluminum version? At the moment there isn’t plans for it but maybe later down the road.
Updates:
To follow the project you can keep up with this thread, my website www.Viktus.Design or via the Viktus Design discord server where I will be most active.
Discord invite: https://discord.com/invite/4w6aUKb