类型: GB
作者: .
发布时间:
2020-07-02 13:46:53
更新时间: 2020-09-26 00:38:44
原链接:
https://geekhack.org/index.php?topic=107256.0
I know some of you have been waiting such a long time for
this…
Wasdat Code & Wasdat group buy
What is this?
The WASD v2 and
WASD CODE are very nice boards, but they lack one thing:
programmability.
That’s where I decided to make these
boards support QMK, by replacing the controller. So here
they are, replacement controllers to make your WASD v2 or
CODE fully programmable.
What took you so long?
Initially, with the original Wasdat, it only
supported the TKL model. After the GB period was over, I
learned that it could support the fullsize model as well
with just a few changes.
I had gotten a lot of requests
to make one for the CODE. So I borrowed one from a fellow
geekhack user (thanks mate!) but with everything going on in
my life I didn’t make much progress.
I did get a
controller working. Just like the original could, I wanted
to make it support the fullsize model. Another user helped
me by measuring things on the PCB of his board, and it got
me pretty far.
Many thanks to him as well. Now I’m glad
to be able to say that it’s /finally/
ready.
Will this work with my keyboard?
The normal Wasdat only works with V2 TKL and full size
boards, both ANSI and ISO layouts. IT DOES NOT WORK WITH
V3 OR LATER VERSIONS
The Wasdat Code only works with
CODE (V2B) TKL and full size boards, both ANSI and ISO
layouts. IT DOES NOT WORK WITH V3 OR LATER
VERSIONS
Programmability
You can use
either QMK Configurator or VIA to change any key on your
board. Both controllers are already fully supported.
Here’s
a demo of VIA for the Wasdat Code:
Some notes: (read before buying!)
All indicator LEDs work.
DIP switches become
useless with this upgrade. On the normal Wasdat, flipping
the first DIP switch twice will make it enter the
bootloader. The Wasdat Code does not have that.
For
both models, enter the bootloader by holding the FN key
while plugging the board in. Not required when using VIA.
Both
Wasdats use an ATmega32u4 microcontroller.
When
upgrading to the Wasdat Code in a fullsize WASD CODE, expect
the LEDs to have a slightly lower maximum brightness. This
is due to the fullsize model having resistors on the PCB
itself as well.
PLEASE test the controller before
closing your board up again.
Where do I get one?
Both the Wasdat and Wasdat Code are priced at 25
EUR/25 USD.
By the way.. I have 17 Wasdat
controllers ready to ship. First 17 controllers ordered at
the EU link will be sent out super early!
EU: CLICK HERE FOR WASDAT
EU: CLICK HERE FOR WASDAT CODE
US: CLICK HERE FOR WASDAT
US: CLICK HERE FOR WASDAT CODE
This group buy ends July 31st
Frequently asked questions
No.
HUGE thank you to everyone who helped me
debug and test these controllers. Couldn’t have done it
without you!
