类型: GB
作者:
DALExSNAIL
发布时间:
2020-01-19 15:41:27
更新时间: 2021-09-19 19:58:22
原链接:
https://geekhack.org/index.php?topic=104298.0
PHANTOM PLATES AND LINERS
*Phantom options leave a bit to be desired these
days, what with the progression of design over these few
years. I’ve slowly been putting together things to help with
this, if only a small amount. The easiest and most
affordable starting point seems to be plates, and FR4 is a
perfect option for test runs. In the future other material
options may be available, but that depends on interest and
successfulness of projects.
This will be a small test
run to see how well the design works, and iron out small
kinks. This will currently only be the plates + liners and
not any PCBs, but I am in works with a few people to design
better PCBs for filco/phantom style cases that should
be affordable, and up to date with current standards.
*
GROUP BUY FORM
Details and Notes
-
I’m currently only doing fixed ansi in this test run, but am open to universal or fixed ISO in the future.
-
The design is inspired by OTD plates, relief cuts are fun!
-
Compatible with cherry stabalizers as well as costar for this run, in the future these will be offered with a PCB and will only support PCB mount cherry stabs.
-
This will technically work with the stock PCB of a Filco with a small modification(see below/)*, BUT I do recommend an aftermarket PCB solution such as a Phantom or an LFK-TKL. And if you’re patient, I will be running a buy with more affordable PCBs in the future.
-
1.6mm thick, for now
OPTIONS
Plates -
FR4 Full plate - $20
-
FR4 Half plate - $20
-
Micarta// Full plate (Limit of 5) - $25
Liners -
Neoprene Firm - Good old neoprene. This should work well to reduce vibration, and should dampen the sound of the board a bit. This would be a middle of the road option, with some benefits from each of the ones below.
-
Cork Rubber - - This is a cork and neoprene blend with medium density, high durability, and decent sound dampening. This will dampen the sound similar to the full neoprene, but should have a deeper sound signature, lighter weight, and will allow for more plate flex. I’m personally partial to this, because it looks cool as hell, and I like the idea of a deeper more “woody” sound.
-
Closed Cell Sponge Rubber - This is essentially high density neoprene foam. Because this is a foam, it will almost definitely provide the most sound dampening. Normally the space between the plate and the PCB is 1/8” inch, and I can get this at 3/16”, since this is a foam like material it will compress and reduce vibration/sound a bit more.
-
All Material Options Respectively - $22 per liner
Shipping -
**$12 CONUS,*Individually determined international //*/*
The buy will open 12:00pm EST 1/20/2020 and will run until 11:59pm EST Sunday 1/26/2020
Estimated to ship in [Pending] - Subject to change depending on potential manu issues or QC problems. Will keep updated here and in Discord.
GROUP BUY FORM - Closed
JOIN THE DISCORD FOR MORE FREQUENT UPDATES
*After joining, navigate to the /#role-request channel and react with the GOAT emoji to be assigned the filco role. I try and keep pings to a minimum, but be aware that I will ping this role for important updates. -
I only hope you guys stan your Filcos as much as I do
