类型: GB
作者: The_Royal
发布时间: 2019-12-12 16:36:17
更新时间:
2019-12-23 16:11:58
原链接:
https://geekhack.org/index.php?topic=103834.0
The Ave. - Group Buy
An Ortholinear Battlestation
Link to Original IC Thread
The time has finally come people! Its
The Ave. Group Buy!! The ultimate, sexy,
cute, and powerful, ortholinear-battlestation!
So
things have changed a lot in the past month or so. Here are
some main points of note…
1st:
E-Yellow has been tossed out for options just due to
its complicated nature and that I know sometimes it can come
out looking more Orange than Yellow. All of us are pretty
tough and picky when it comes to colors and without a full
and final prototype finished in E-Yellow, I just dont feel
comfortable with going through with having it be availible
and then people getting upset when it didn’t turn out like
they expected. No one likes that.
In its place,
however, I have spoken with the factory and Sandblasted
Polycarbonate will be subsituting the E-Yellow!
Which I
know a lot of people wanted and Im excited to be able to
offer it for the first big Ave GB!
2nd:
the second notable change
is that now, every single base kit configuration will come
with BOTH a full brass Plate set and a full
FR4 (PCB Material) Plate Set! Options are nice, but having
them distributed all over the place isnt lol. SO NOW YOU GET
BOTH SON.
The Group Buy Details:
CLOSED
[https://forms.gle/dsoQzuDKTJafeFFK9[/s]]LINK
TO OFFICIAL GB GOOGLE FORM](http://[s)
Link Above Goes Live:
11:OO (AM) CST - Friday Dec. 13th
Form will remain open until all spots have been
occupied
Limited to x2 Kits Per Person/*
-
If you do want to order 2 Kits, just fill the form out
once more and submit your 2nd Kit Options.
/*(Submission Of More Than 2 Orders will entail the entire order history of the individual being canceled)
Extras are available for purchase within the same form.
We currently have a soft limit of 45 available spots to be filled after the early-bird supporters joined the GB within the main Ave Discord earlier this week.
If it turns out demand is enough though, I will keep the form open and accept up to 100 additional orders. Which is doubtful but I am all for more availability if the people seek it.
Estimated Fulfillment of All Orders is April 2020
Board and Kit Details:
Cost:
$355.00 USD + Shipping (Per Kit)
Colors:
Silver/Clear Anodizing - Semigloss
Sandblasted Clear Polycarbonate - Matte
Rose Gold (Matched to PANTONE 7605 C) - Semigloss
Asphalt Navy (Matched to PANTONE 432 C) - Matte
Sample Anodizing from the Factory:
/*Silver Can be Seen In Prototype Photos below.
“Whats in a Kit?”
x1 Ave Aluminum Case (Anodized Or Sandblasted PC) - x1 Top Panel
-
x1 Bottom Housing
x2 Switch Plate Assemblies - x1 Sandblasted Brass Main Switch-Plate (Ortho Or Staggered)
- x1 Sandblasted Brass Top Panel Switch-Plate
- x1 FR4 White Main Switch-Plate (Ortho Or Staggered)
-
x1 FR4 White Top Panel Switch-Plate
x1 PCB Assembly (All Green Soldermask w/Gold Surface Finish) - x1 Ave Main PCB (Ortho Or Staggered)
- x1 Ave Top Panel PCB
-
x1 Ave Breakout USB-C PCB
x60 Switching Diodes (THT)
x1 Rotary Encoder Knob (Sandblasted Brass)[/b]
x1 Cork Base Pad[/b]
x1 JST Cable(Breakout USB)[/b]
x1 Ribbon Cable (Main PCB Interconnect)[/b]
x3 Through-Hole RGB LEDs (w/3D Printed Height Guide)[/b]
x1 Allen Hex Key
Necessary M2 Hardware (Various Lengths)
/*(Extra Parts And Pieces are an additional cost)
Layouts: (Two Different PCBs & Plates)
/*Note: Full Grid Layout on Ortho Layout IS SUPPORTED forgot to add that by mistake.
PCBs:
Features:
Fully powered and supported by QMK Firmware
PCBs Designed by me The Royal
2 Independent PCBs (I don’t like Swiss Cheese)
Fun, Eye-catching and Efficient layouts + Simple Routing = beautiful PCB
Gold Plated Stabilizer Mounting Points
PCB Interconnect (PicoFlex Ribbon Cable) for the separate angled top Panel PCB
THROUGH-HOLE NeoPixel RGB LEDs for indicators or a wild Christmas party.
Breakout USB Type-C Daughter Board (Also designed by Me)
EC11 Rotary encoder located in top left corner. (Can be configured to do anything you wish.)
Through-Hole Diodes for the Vintage Look and Feel (Soldered buy YOU) -
There is a lot of satisfaction in putting the time in to
building and soldering something that’s yours. Makes it
all the more worth it
Note:
/* NO IN-SWITCH LEDs (Cleaner PCB and Most of us don’t care for it)
MX-Only
( Colors not accurate- GB Color will be Green with Gold Surface Finish)
Top-Ortho PCB
Bottom-Staggered PCB
Plates:
Notable Change made for GB-Simplified Switch cutouts and Modified Top Panel Swtich Plate to face inward for accent in Clear Polycarbonate Case
FR4 Prototype Plates (Color and Mounting Not Accurate) - (GB Color will be White)
The Knob:
Will be Sandblasted (UNCOATED) beautiful brass. For the Love of sweet, sweet patina.
CLOSED
**[https://forms.gle/dsoQzuDKTJafeFFK9[/s]]LINK TO OFFICIAL GB GOOGLE FORM](http://[s)**
**Renders:**
Renders for GMK Finer Things by Abec13:
Prototype Pics:
Glamor Proto Pics:
Sound Test:
CLOSED
[https://forms.gle/dsoQzuDKTJafeFFK9[/s]]LINK TO OFFICIAL GB GOOGLE FORM](http://[s)
Link Above Goes Live:
11:OO (AM) CST - Friday Dec. 13th
Cost:
$355.00 USD + Shipping (Per Kit)
Estimated Fulfillment of All Orders is April 2020